Expansionjoints DN 150

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Axial steel expansion joint with flanges - completely made of stainless steel - Typ BOA 7120 00S-KW

Axial steel expansion joint with flanges - completely made of stainless steel - Typ BOA 7120 00S-KW

Universial Vibration: 1.6
DN: 150
PN: 25
Overall Length [mm]: 305
Axial Movement (complete) [mm]: 62
Lateral Movement (complete) [mm]: 22
Universal Vibration (complete): 1.6

51423004/25

Axial steel expansion joint with flanges - completely made of stainless steelTyp BOA 7120 00S-KW Axial steel expansion joint with flanges for axial or lateral movement capacity or for removing vibrations. Materials: Bellows: Stainless steel, material type 1.4571 Flanges: 1.4571 The expansion joints (up to PN 16) are tested by the DVGW to DIN 30 681 and are approved for gas plants. Marking with the relevant DIN DVGW Reg. No. possible for an additional charge. We reserve the right to make dimensional and design changes. Larger nominal widths on request.

Variants from €584.00*

€3,874.00*

Lateral Expansion Joints with weld ends - Typ BOA 7810

Lateral Expansion Joints with weld ends - Typ BOA 7810

DN: 150
PN: 16
Overall Length [mm]: 830
Lateral Movement (complete) [mm]: 150

51540200/16

Lateral Expansion Joints with weld endsTyp BOA 7810 Lateral expansion joint with weld ends and external restraints, suited for lateral movement compensation on any plane. Materials: Bellows: Stainless steel 1.4571 Weld ends: Carbon steel Restraint: Carbon steel The expansion joints PN 10 and PN 16 are tested by the DVGW to DIN 30 681 and are approved for gas plants. We reserve the right to make dimensional and design changes. Larger nominal widths on request.

Variants from €479.00*

€1,484.00*

Axial steel expansion joint with flanges - Typ BOA 7120 000

Axial steel expansion joint with flanges - Typ BOA 7120 000

DN: 150
PN: 40
Overall Length [mm]: 201
Axial Movement (complete) [mm]: 20
Lateral Movement (complete) [mm]: 2
Universal Vibration (complete): 0.2

51420309/40

Axial steel expansion joint with flangesTyp BOA 7120 000 Axial steel expansion joint with flanges for axial or lateral movement capacity or for removing vibrations. Materials: Bellows: Stainless steel, material type 1.4571 Weld ends: mild steel Flanges: carbon steel The expansion joints (up to PN 16) are tested by the DVGW to DIN 30 681 and are approved for gas plants. Marking with the relevant DIN DVGW Reg. No. possible for an additional charge. We reserve the right to make dimensional and design changes. Larger nominal widths on request.

Variants from €218.00*

€996.00*

Axial steel expansion joint - Inner Sleeve and Protective Tube - flanges - Typ BOA 7129 00X

Axial steel expansion joint - Inner Sleeve and Protective Tube - flanges - Typ BOA 7129 00X

DN: 150
PN: 6
Overall Length [mm]: 1055
Axial Movement (complete) [mm]: 200

51421153/6

Axial steel expansion joint - Inner Sleeve and Protective Tube - flangesTyp BOA 7129 00X Axial steel expansion joint, suitable forΔax without prestressing during installation, with flanges, inner sleeve and protective tube. Materials: Bellows: Stainless steel, material type 1.4571 Weld ends: carbon steel Flanges: carbon steel Inner sleeve and protective tube: carbon steel The expansion joints (up to PN 16) are tested by the DVGW to DIN 30 681 and are approved for gas plants. Marking with the relevant DIN DVGW Reg. No. possible for an additional charge. We reserve the right to make dimensional and design changes. Larger nominal widths on request.

Variants from €264.00*

€2,245.00*

Angular steel expansion joints with weld ends - Typ BOA 7510

Angular steel expansion joints with weld ends - Typ BOA 7510

DN: 150
PN: 25
Overall Length [mm]: 362
Angular Movement (complete) [mm]: 28

6000007033/25

Angular steel expansion joints with weld endsTyp BOA 7510 Single hinged expansion joint with weld ends, suited for angular rotation around one axis. Materials: Bellows: 1.4571 Weld ends: Carbon steel Restraint: Carbon steel The expansion joints PN 10 and PN 16 are tested by the DVGW to DIN 30 681 and are approved for gas plants. Marking with the relevant DIN DVGW Reg. No. possible for an additional charge. We reserve the right to make dimensional and design changes. Larger nominal widths on request.

Variants from €367.00*

€1,466.00*

Axial steel expansion joint with loose flanges - Typ BOA 7150 000

Axial steel expansion joint with loose flanges - Typ BOA 7150 000

DN: 150
PN: 10
Overall Length [mm]: 240
Axial Movement (complete) [mm]: 76
Lateral Movement (complete) [mm]: 28

51422068/10

Axial steel expansion joint with loose flangesTyp BOA 7150 000 Axial steel expansion joint with loose flanges and rim for axial or lateral movement capacity or for removing vibrations. The expansion joints are supplied with suitable gaskets. Materials: Bellows: Stainless steel, Material type 1.4571 Rims: Material type 1.4571 Flanges: Carbon steel, zinc-plated The expansion joints are tested by the DVGW to DIN 30 681 and are approved for gas plants. Marking with the relevant DIN DVGW Reg. No. possible for an additional charge. We reserve the right to make dimensional and design changes. Larger nominal widths on request.

Variants from €172.00*

€899.00*

Lateral Expansion Joints with flanges - Typ BOA 7820

Lateral Expansion Joints with flanges - Typ BOA 7820

DN: 150
PN: 6
Overall Length [mm]: 631
Lateral Movement (complete) [mm]: 174

51540324/6

Lateral Expansion Joints with flangesTyp BOA 7820 Lateral expansion joint with flanges and external restraints, suited for lateral movement compensation on any plane. Materials: Bellows: Stainless steel 1.4571 Flanges: Carbon steel Restraint: Carbon steel The expansion joints PN 10 and PN 16 are tested by the DVGW to DIN 30 681 and are approved for gas plants. We reserve the right to make dimensional and design changes. Larger nominal widths on request.

Variants from €569.00*

€1,648.00*

Axial steel expansion joint with weld ends - completely made of stainless steel - Typ BOA 7110 00S-KW

Axial steel expansion joint with weld ends - completely made of stainless steel - Typ BOA 7110 00S-KW

DN: 150
PN: 25
Overall Length [mm]: 272
Axial Movement (complete) [mm]: 46
Lateral Movement (complete) [mm]: 14
Universal Vibration (complete): 1

51422219/25

Axial steel expansion joint with weld ends - completely made of stainless steelTyp BOA 7110 00S-KW Axial steel expansion joint with weld ends for axial or lateral movement capacity or for removing vibrations. Materials: Bellows: Stainless steel, material type 1.4571 Weld ends: 1.4571 The expansion joints (up to PN 16) are tested by the DVGW to DIN 30 681 and are approved for gas plants. Marking with the relevant DIN DVGW Reg. No. possible for an additional charge. We reserve the right to make dimensional and design changes. Larger nominal widths on request.

Variants from €176.00*

€1,273.00*

Axial steel expansion joint with weld ends - Typ BOA 7110 000

Axial steel expansion joint with weld ends - Typ BOA 7110 000

DN: 150
PN: 25
Overall Length [mm]: 184
Axial Movement (complete) [mm]: 24
Lateral Movement (complete) [mm]: 4
Universal Vibration (complete): 0.2

51420143/25

Axial steel expansion joint with weld endsTyp BOA 7110 000 Axial steel expansion joint with weld ends for axial or lateral movement capacity or for removing vibrations. Materials: Bellows: Stainless steel, material type 1.4571 Weld ends: mild steel The expansion joints (up to PN 16) are tested by the DVGW to DIN 30 681 and are approved for gas plants. Marking with the relevant DIN DVGW Reg. No. possible for an additional charge. We reserve the right to make dimensional and design changes. Larger nominal widths on request.

Variants from €99.00*

€331.00*

Gimbal Expansion Joints with weld ends - Typ BOA 7610

Gimbal Expansion Joints with weld ends - Typ BOA 7610

DN: 150
PN: 40
Overall Length [mm]: 498
Angular Movement (complete) [mm]: 26

6000007134/40

Gimbal Expansion Joints with weld endsTyp BOA 7610 Gimbal expansion joint with weld ends, suited for perpendicular angular rotation. Materials: Bellows: Stainless steel 1.4571 Weld ends: Carbon steel Restraint: Carbon steel We reserve the right to make dimensional and design changes. Larger nominal widths on request.

Variants from €652.00*

€2,610.00*

Axial steel expansion joint - Inner Sleeve and Protective Tube - weld ends - Typ BOA 7119 00X

Axial steel expansion joint - Inner Sleeve and Protective Tube - weld ends - Typ BOA 7119 00X

DN: 150
PN: 16
Overall Length [mm]: 720
Axial Movement (complete) [mm]: 107

51420936/16

Axial steel expansion joint - Inner Sleeve and Protective Tube - weld endsTyp BOA 7119 00X Axial steel expansion joint, suitable for Δax without prestressing during installation, with weld ends, inner sleeve and protective tube. Materials: Bellows: Stainless steel, material type 1.4571 Weld ends: mild steel Inner sleeve and protective tube: carbon steel The expansion joints (up to PN 16) are tested by the DVGW to DIN 30 681 and are approved for gas plants. Marking with the relevant DIN DVGW Reg. No. possible for an additional charge. We reserve the right to make dimensional and design changes. Larger nominal widths on request.

Variants from €137.00*

€1,620.00*

Vibration absorber with loose flanges, supported external restraint (> 120°C) - Typ BOA Epsilon-C > than 120°C

Vibration absorber with loose flanges, supported external restraint (> 120°C) - Typ BOA Epsilon-C > than 120°C

DN: 150
PN: 16
Overall Length [mm]: 130

6000013638/16

Vibration absorber with loose flanges, supported external restraint (> 120°C)Typ BOA EPSILON-C Vibration absorber with loose flanges and rim for absorbing vibrations in circular plane, with sound insulating supported external restraint. operating temperature: >120°C Materials Multi-layer bellows and rim: 1.4571 Flanges: Carbon steel, zinc-plated Restraint: Carbon steel, zinc-plated Absorber discs: Carbon steel, zinc-plated (above 120 °C steel cushions) We reserve the right to make dimensional and design changes. Larger nominal widths on request.

Variants from €600.00*

€1,304.00*

Rubber Expansion Joints with loose flanges - Typ BOA 314-U-D-Nitril

Rubber Expansion Joints with loose flanges - Typ BOA 314-U-D-Nitril

DN: 150
PN: 16
Overall Length [mm]: 150
Axial Movement (complete) [mm]: 26
Lateral Movement (complete) [mm]: 24
Angular Movement (complete) [mm]: 30

6000092865/16

Rubber Expansion Joints with loose flangesTyp BOA 314 U-D-Nitril Untied rubber expansion joint with lap joint flanges. Suitable for axial, lateral and angular movement or vibration damping. Color code: yellow Materials: Bellow: - inner layer Nitril - cord layers Nyloncord - outer layer EPDM Flanges: - carbon steel, zinc-plated Pressure reduction: Up to 30 °C : 100 % PN From 30 °C to 60 °C: max. 10 bar From 60 °C to 80 °C: max. 6,5 bar Allowable working conditions: Working pressure (PN): 16 bar Vacuum: Pa 0,9 bar Temperature: -10°C to 80°C Test pressure: 1,5 times working pressure We reserve the right to make dimensional and design changes.

Variants from €57.00*

€207.00*

Gimbal Expansion Joints with flanges - Typ BOA 7620

Gimbal Expansion Joints with flanges - Typ BOA 7620

DN: 150
PN: 25
Overall Length [mm]: 522
Angular Movement (complete) [mm]: 28

6000007183/25

Gimbal Expansion Joints with flangesTyp BOA 7620 Gimbal expansion joint with flanges, suited for perpendicular angular rotation. Materials: Bellows: Stainless steel 1.4571 Flanges: Carbon steel Restraint: Carbon steel We reserve the right to make dimensional and design changes. Larger nominal widths on request.

Variants from €991.00*

€3,348.00*

Rubber Expansion Joints with loose flanges - Typ BOA 314-U-D-EPDM

Rubber Expansion Joints with loose flanges - Typ BOA 314-U-D-EPDM

DN: 150
PN: 16
Overall Length [mm]: 150
Axial Movement (complete) [mm]: 26
Lateral Movement (complete) [mm]: 24
Angular Movement (complete) [mm]: 30

6000092783/16

Rubber Expansion Joints with loose flangesTyp BOA 314 U-D-EPDM Untied rubber expansion joint with lap joint flanges. Suitable for axial, lateral and angular movement or vibration damping. Color code: red – (point) Materials: Bellow: - inner layer EPDM - cord layers Nyloncord - outer layer EPDM Flanges: - carbon steel, zinc-plated Pressure reduction: Up to 30 °C : 100 % PN From 30 °C to 60 °C: max. 10 bar From 60 °C to 100 °C: max. 4,1 bar Allowable working conditions: Working pressure (PN): 16 bar Vacuum: Pa 0,9 bar Temperature: -10°C to 100°C Test pressure: 1,5 times working pressure We reserve the right to make dimensional and design changes.

Variants from €47.00*

€169.00*

Low Pressure Expansion Joints with weld ends - Typ BOA EXW

Low Pressure Expansion Joints with weld ends - Typ BOA EXW

DN: 150
PN: 2
Overall Length [mm]: 300
Axial Movement (complete) [mm]: 118
Lateral Movement (complete) [mm]: 32

K-0009394/2

Low Pressure Expansion Joints with weld endsTyp BOA EXW Low pressure - Expansion Joint with weld ends for axial or lateral movement capacity. Materials: Bellows: Stainless steel, material type 1.4571 Weld ends: 1.4541 Designed for operating pressures of up to 2.5 bar at 20 °C. When considering the reduction factors operating pressures of 1.6 bar at 300 °C or 1.4 bar at 500 °C operating temperature. We reserve the right to make dimensional and design changes. Larger nominal widths on request.

Variants from €304.00*

€454.00*

Angular steel expansion joints with flanges - Typ BOA 7520

Angular steel expansion joints with flanges - Typ BOA 7520

DN: 150
PN: 25
Overall Length [mm]: 522
Angular Movement (complete) [mm]: 28

6000007083/25

Angular steel expansion joints with flangesTyp BOA 7520 Single hinged expansion joint with flanges, suited for angular rotation around one axis. Materials: Bellows: 1.4571 Flanges: Carbon steel Restraint: Carbon steel The expansion joints PN 10 and PN 16 are tested by the DVGW to DIN 30 681 and are approved for gas plants. Marking with the relevant DIN DVGW Reg. No. possible for an additional charge. We reserve the right to make dimensional and design changes. Larger nominal widths on request.

Variants from €687.00*

€2,351.00*

Rubber Expansion Joints with loose flanges - Typ BOA 314-U-A-Nitril

Rubber Expansion Joints with loose flanges - Typ BOA 314-U-A-Nitril

DN: 150
PN: 16
Overall Length [mm]: 130
Axial Movement (complete) [mm]: 22
Lateral Movement (complete) [mm]: 24
Angular Movement (complete) [mm]: 30

6000092847/16

Rubber Expansion Joints with loose flangesTyp BOA 314 U-A-Nitril Untied rubber expansion joint with lap joint flanges. Suitable for axial, lateral and angular movement or vibration damping. Color code: yellow Materials: Bellow: - inner layer Nitril - cord layers Nyloncord - outer layer EPDM Flanges: - carbon steel, zinc-plated Pressure reduction: Up to 30 °C : 100 % PN From 30 °C to 60 °C: max. 10 bar From 60 °C to 80 °C: max. 6,5 bar Allowable working conditions: Working pressure (PN): 16 bar Vacuum: Pa 0,9 bar Temperature: -10°C to 80°C Test pressure: 1,5 times working pressure We reserve the right to make dimensional and design changes. Larger nominal widths on request.

Variants from €54.00*

€190.00*

Tip

Vibration absorber with loose flanges - Typ BOA Alpha-C

Vibration absorber with loose flanges - Typ BOA Alpha-C

DN: 150
PN: 16
Overall Length [mm]: 130

6000017313/16

Vibration absorber with loose flangesTyp BOA ALPHA-C Vibration absorber with loose flanges and rim for absorbing all-round vibrations. Materials Multi-layer bellows and rim: 1.4571 Flanges: Carbon steel, zinc-plated We reserve the right to make dimensional and design changes. Larger nominal widths on request.

Variants from €190.40*

From €368.80*

Tip

Vibration absorber with loose flanges, supported external restraint (< 120°C) - Typ BOA Epsilon-C

Vibration absorber with loose flanges, supported external restraint (< 120°C) - Typ BOA Epsilon-C

DN: 150
PN: 16
Overall Length [mm]: 130

6000017338/16

Vibration absorber with loose flanges, supported external restraint (< 120°C)Typ BOA EPSILON-C Vibration absorber with loose flanges and rim for absorbing vibrations in circular plane, with sound insulating supported external restraint. Maximum operating temperature: 120°C Materials Multi-layer bellows and rim: 1.4571 Flanges: Carbon steel, zinc-plated Restraint: Carbon steel, zinc-plated Absorber discs: Elastomer operating temperature:

Variants from €198.40*

From €511.20*

Low Pressure Expansion Joints with flanges - Typ BOA EXF

Low Pressure Expansion Joints with flanges - Typ BOA EXF

DN: 150
PN: 2
Overall Length [mm]: 240
Axial Movement (complete) [mm]: 118
Lateral Movement (complete) [mm]: 36

K-0009245/2

Low Pressure Expansion Joints with flangesTyp BOA EXF Low pressure - Expansion Joint with flanges for axial or lateral movement capacity. Materials: Bellows: Stainless steel, material type 1.4571 Flanges: 1.4541 Designed for operating pressures of up to 2.5 bar at 20 °C. When considering the reduction factors operating pressures of 1.6 bar at 300 °C or 1.4 bar at 500 °C operating temperature. We reserve the right to make dimensional and design changes. Larger nominal widths on request.

Variants from €321.00*

€501.00*

Rubber Expansion Joints with loose flanges - Typ BOA 314-U-A-EPDM

Rubber Expansion Joints with loose flanges - Typ BOA 314-U-A-EPDM

DN: 150
PN: 16
Overall Length [mm]: 130
Axial Movement (complete) [mm]: 22
Lateral Movement (complete) [mm]: 24
Angular Movement (complete) [mm]: 30

J314E15016/16

Rubber Expansion Joints with loose flangesTyp BOA 314 U-A-EPDM Untied rubber expansion joint with lap joint flanges. Suitable for axial, lateral and angular movement or vibration damping. Color code: red – (point) Materials: Bellow: - inner layer EPDM - cord layers Nyloncord - outer layer EPDM Flanges: - carbon steel, zinc-plated Pressure reduction: Up to 30 °C : 100 % PN From 30 °C to 60 °C: max. 10 bar From 60 °C to 100 °C: max. 4,1 bar Allowable working conditions: Working pressure (PN): 16 bar Vacuum: Pa 0,9 bar Temperature: -10°C to 100°C Test pressure: 1,5 times working pressure We reserve the right to make dimensional and design changes. Larger nominal widths on request.

Variants from €46.00*

€158.00*

Rubber expansion joint with loose flanges - supported external restraint - Typ BOA 384-TR-A-EPDM

Rubber expansion joint with loose flanges - supported external restraint - Typ BOA 384-TR-A-EPDM

DN: 150
PN: 16
Overall Length [mm]: 130
Lateral Movement (complete) [mm]: 24
Angular Movement (complete) [mm]: 30

J384E15016/16

Rubber expansion joint with loose flanges - supported external restraintTyp BOA 384 TR-A-EPDM Untied rubber expansion joint with lap joint flanges and sound insulated external restraints. Suitable for lateral or angular movement or vibration damping. Color code: red – (point) Materials: Bellow: - inner layer EPDM - cord layers Nyloncord - outer layer EPDM Flanges: - carbon steel, zinc-plated Restraint: - carbon steel, zinc-plated Pressure reduction: Up to 30 °C : 100 % PN From 30 °C to 60 °C: max. 10 bar From 60 °C to 100 °C: max. 4,1 bar Allowable working conditions: Working pressure (PN): 16 bar Vacuum: Pa 0,9 bar Temperature: -10°C to 100°C Test pressure: 1,5 times working pressure Importend: The external restraints are supplied loose and are to be assembled on site according to the enclosed instructions! We reserve the right to make dimensional and design changes. Larger nominal widths on request.

Variants from €110.00*

€330.00*