Rubber Expansion Joints

Rubber expansion joints are particularly suited to compensate mechanical vibrations, compensate axial and lateral movements, compensate installation misalignments and retain sound.

Rubber expansion joints with tie rods that are supported by rubber mountings are especially suited to retain sound and to compensate movements in plants where the installation of pipe anchors to withstand pressure thrust is impossible.

Rubber Expansion Joints with loose flanges - Typ BOA 314-U-A-Nitril

DN: 100
PN: 16
Overall Length [mm]: 130
Axial Movement (complete) [mm]: 22
Lateral Movement (complete) [mm]: 24
Angular Movement (complete) [mm]: 30

6000092844/16

Rubber Expansion Joints with loose flangesTyp BOA 314 U-A-Nitril Untied rubber expansion joint with lap joint flanges. Suitable for axial, lateral and angular movement or vibration damping. Color code: yellow Materials: Bellow: - inner layer Nitril - cord layers Nyloncord - outer layer EPDM Flanges: - carbon steel, zinc-plated Pressure reduction: Up to 30 °C : 100 % PN From 30 °C to 60 °C: max. 10 bar From 60 °C to 80 °C: max. 6,5 bar Allowable working conditions: Working pressure (PN): 16 bar Vacuum: Pa 0,9 bar Temperature: -10°C to 80°C Test pressure: 1,5 times working pressure We reserve the right to make dimensional and design changes. Larger nominal widths on request.

Variants from €52.00*

€105.00*

Details

Rubber Expansion Joints with loose flanges - Typ BOA 314-U-D-Nitril

DN: 125
PN: 16
Overall Length [mm]: 150
Axial Movement (complete) [mm]: 26
Lateral Movement (complete) [mm]: 24
Angular Movement (complete) [mm]: 30

6000092864/16

Rubber Expansion Joints with loose flangesTyp BOA 314 U-D-Nitril Untied rubber expansion joint with lap joint flanges. Suitable for axial, lateral and angular movement or vibration damping. Color code: yellow Materials: Bellow: - inner layer Nitril - cord layers Nyloncord - outer layer EPDM Flanges: - carbon steel, zinc-plated Pressure reduction: Up to 30 °C : 100 % PN From 30 °C to 60 °C: max. 10 bar From 60 °C to 80 °C: max. 6,5 bar Allowable working conditions: Working pressure (PN): 16 bar Vacuum: Pa 0,9 bar Temperature: -10°C to 80°C Test pressure: 1,5 times working pressure We reserve the right to make dimensional and design changes.

Variants from €55.00*

€163.00*

Details

Rubber Expansion Joints with thread - Typ BOA 3160 00S-A-EPDMT

DN: 25
PN: 10
Overall Length [mm]: 200
Axial Movement (complete) [mm]: 35
Lateral Movement (complete) [mm]: 30

H51423811/10

Rubber Expansion Joints with screw socketsTyp BOA 3160 00S-A-EPDMT – based on DIN 4809 Rubber expansion joint with screw sockets for axial or lateral movement capacity or for removing vibrations. Color code: red – (point), TÜV-Süd certificate Nr. 15 04 90299 002 Materials: Bellow: - inner layer EPDM - cord layers Nyloncord - outer layer EPDM Screw connection: - GGG-40 (zinc-plated) Allowable working conditions: Operating pressure: overpressure 10 bar negative pressure pabs on request temperature –10 °C to 110 °C Test pressure 1.5 times the operating pressure In heating systems according to DIN 4809: 10 bar – max. 100 °C 6 bar – max. 110 °C We reserve the right to make dimensional and design changes.

€319.00*

Details

Rubber Expansion Joints with loose flanges - Typ BOA 3140 00S-A-EPDMT

DN: 400
PN: 16
Overall Length [mm]: 200
Axial Movement (complete) [mm]: 60
Lateral Movement (complete) [mm]: 30

H600061823/16

Rubber Expansion Joints with loose flangesTyp BOA 3140 00S-A-EPDMT – based on DIN 4809 Rubber expansion joint with flanges for axial or lateral movement capacity or for removing vibrations. Color code: red – (point), TÜV-Süd certificate Nr. 15 04 90299 002 Materials: Bellow: - inner layer EPDM - cord layers Nyloncord - outer layer EPDM Flanges: - carbon steel, zinc-plated Allowable working conditions: Operating pressure: overpressure 16 bar negative pressure pabs on request temperature –10 °C to 110 °C Test pressure 1.5 times the operating pressure In heating systems according to DIN 4809: 10 bar – max. 100 °C 6 bar – max. 110 °C We reserve the right to make dimensional and design changes.

Variants from €191.00*

€3,050.00*

Details

Rubber expansion joint with loose flanges - supported external restraint - Typ BOA 384-TR-A-EPDM

DN: 300
PN: 16
Overall Length [mm]: 130
Lateral Movement (complete) [mm]: 24
Angular Movement (complete) [mm]: 30

J384E30016/16

Rubber expansion joint with loose flanges - supported external restraintTyp BOA 384 TR-A-EPDM Untied rubber expansion joint with lap joint flanges and sound insulated external restraints. Suitable for lateral or angular movement or vibration damping. Color code: red – (point) Materials: Bellow: - inner layer EPDM - cord layers Nyloncord - outer layer EPDM Flanges: - carbon steel, zinc-plated Restraint: - carbon steel, zinc-plated Pressure reduction: Up to 30 °C : 100 % PN From 30 °C to 60 °C: max. 10 bar From 60 °C to 100 °C: max. 4,1 bar Allowable working conditions: Working pressure (PN): 16 bar Vacuum: Pa 0,9 bar Temperature: -10°C to 100°C Test pressure: 1,5 times working pressure Importend: The external restraints are supplied loose and are to be assembled on site according to the enclosed instructions! We reserve the right to make dimensional and design changes. Larger nominal widths on request.

Variants from €107.00*

€792.00*

Details

Rubber expansion joint with loose flanges - supported external restraint - Typ BOA 3840 DFS-A-EPDMT

DN: 500
PN: 10
Overall Length [mm]: 200
Lateral Movement (complete) [mm]: 30

H600061844/10

Rubber expansion joint with loose flanges - supported external restraintTyp BOA 3840 DFS-A-EPDMT – based on DIN 4809 Rubber expansion joint with flanges and external sound absorbing tie rod restraint for lateral movement capacity or for removing vibrations. Color code: red – (point), TÜV-Süd certificate Nr. 15 04 90299 002 Materials: Bellow: - inner layer EPDM - cord layers Nyloncord - outer layer EPDM Flanges: - carbon steel, zinc-plated Restraint: - carbon steel, zinc-plated Allowable working conditions: Operating pressure: overpressure 16 bar negative pressure pabs on request temperature –10 °C to 110 °C Test pressure 1.5 times the operating pressure In heating systems according to DIN 4809: 10 bar – max. 100 °C 6 bar – max. 110 °C We reserve the right to make dimensional and design changes.

Variants from €332.00*

€5,296.00*

Details

Rubber expansion joint with thread - Typ BOA 316-TU-A-Nitril

DN: 40
PN: 16
Overall Length [mm]: 186
Axial Movement (complete) [mm]: 28
Lateral Movement (complete) [mm]: 44
Angular Movement (complete) [mm]: 60

6000092946/16

Rubber expansion joint with threadTyp BOA 316 TU-A-Nitril Rubber expansion joint with screw sockets for axial or lateral movement capacity or for removing vibrations. Color code: yellow Materials: Bellow: - inner layer Nitril - cord layers Nyloncord - outer layer EPDM Screw connection: - Malleable iron, galvanised Pressure reduction: Up to 30 °C : 100 % PN From 30 °C to 60 °C: max. 7,5 bar From 60 °C to 80 °C: max. 5,0 bar Allowable working conditions: Working pressure (PN): 16 bar Vacuum: Pa 0,9 bar Temperature: -10°C to 80°C Test pressure: 1,5 times working pressure We reserve the right to make dimensional and design changes.

Variants from €33.00*

€46.00*

Details

Rubber Expansion Joints with loose flanges - Typ BOA 314-U-D-EPDM

DN: 150
PN: 16
Overall Length [mm]: 150
Axial Movement (complete) [mm]: 26
Lateral Movement (complete) [mm]: 24
Angular Movement (complete) [mm]: 30

6000092783/16

Rubber Expansion Joints with loose flangesTyp BOA 314 U-D-EPDM Untied rubber expansion joint with lap joint flanges. Suitable for axial, lateral and angular movement or vibration damping. Color code: red – (point) Materials: Bellow: - inner layer EPDM - cord layers Nyloncord - outer layer EPDM Flanges: - carbon steel, zinc-plated Pressure reduction: Up to 30 °C : 100 % PN From 30 °C to 60 °C: max. 10 bar From 60 °C to 100 °C: max. 4,1 bar Allowable working conditions: Working pressure (PN): 16 bar Vacuum: Pa 0,9 bar Temperature: -10°C to 100°C Test pressure: 1,5 times working pressure We reserve the right to make dimensional and design changes.

Variants from €46.00*

€164.00*

Details

Rubber expansion joint with thread - Typ BOA 316-TU-A-EPDM

DN: 40
PN: 16
Overall Length [mm]: 186
Axial Movement (complete) [mm]: 28
Lateral Movement (complete) [mm]: 44
Angular Movement (complete) [mm]: 60

J316E04016/16

Rubber expansion joint with threadTyp BOA 3160 TU-A-EPDM Rubber expansion joint with screw sockets for axial or lateral movement capacity or for removing vibrations. Color code: red Materials: Bellow: - inner layer EPDM - cord layers Nyloncord - outer layer EPDM Screw connection: - Malleable iron, galvanised Pressure reduction: Up to 30 °C : 100 % PN From 30 °C to 60 °C: max. 7,5 bar From 60 °C to 80 °C: max. 3,1 bar Allowable working conditions: Working pressure (PN): 16 bar Vacuum: Pa 0,9 bar Temperature: -10°C to 100°C Test pressure: 1,5 times working pressure We reserve the right to make dimensional and design changes.

Variants from €28.00*

€38.00*

Details

Rubber Expansion Joints with loose flanges - Typ BOA 314-U-A-EPDM

DN: 65
PN: 16
Overall Length [mm]: 130
Axial Movement (complete) [mm]: 22
Lateral Movement (complete) [mm]: 24
Angular Movement (complete) [mm]: 30

J314E06516/16

Rubber Expansion Joints with loose flangesTyp BOA 314 U-A-EPDM Untied rubber expansion joint with lap joint flanges. Suitable for axial, lateral and angular movement or vibration damping. Color code: red – (point) Materials: Bellow: - inner layer EPDM - cord layers Nyloncord - outer layer EPDM Flanges: - carbon steel, zinc-plated Pressure reduction: Up to 30 °C : 100 % PN From 30 °C to 60 °C: max. 10 bar From 60 °C to 100 °C: max. 4,1 bar Allowable working conditions: Working pressure (PN): 16 bar Vacuum: Pa 0,9 bar Temperature: -10°C to 100°C Test pressure: 1,5 times working pressure We reserve the right to make dimensional and design changes. Larger nominal widths on request.

Variants from €45.00*

€63.00*

Details